Resoling a shoe is relatively easy DIY can cope with home repair. Just follow these simple steps:

1. The first step is to clean the soles of his shoes. You will want to remove all dirt, gum and dirt. If you must use soap and water to clean the soles, make sure to allow the plant to dry completely before proceeding with repairs.

2. Remove templates of the shoe. Then using a razor or knife, cut the older plant.

3. Use a file to scrape the edges of the shoe where the sole was removed. This creates a rough surface that will support the new plant foot to stick to shoes.

4. This next step depends on the type of plants you have purchased. Self-stick soles can be carefully aligned with the bottom of the shoe and then attached. The best way to put pressure on the link and make sure the stick is new soles wear shoes in the house.

Soles are adhesive require some type of shoe-repair contact cement. You should be able to find a suitable product to your local shoe store.

5. Once the new plants, strongly united, scissors or a knife to trim excess skin. You may want to use the file at the edges of new soles to give the shoes a smooth finish.

If your shoes also need a new pair of heels, then you must attach midsoles to the bottom of the section the front of the shoe and to meet the heel area separately.

1. Remove the beads to remove all nails and unscrew the screws. Once the nails or screws are out, the heel should come up with a few strong pulls. (Do not be alarmed if you break the heel in the process.)

2. Using a file, remove any glue residue or other dirt on the shoe.

3. Apply contact cement to repair shoes in the shoe area where you want the check attached. Carefully line up the heel of substitution, and then press firmly to the caliper.

4. Once the glue has dried, you to reinforce the heel again with several nails or screws. The best thing to do is copy the method used to attach the shoe heel in the original. Be careful not to apply nails or screws too close to the edge of the heel, as this will cause the heel weak and more likely to break.

5. Once the heel is well attached, use a file to remove rough edges or glue residue.

About the Author:

Jane Barron works for OddShoeFinder.com,a free online website that helps people find mismatched footwear.Get more information on club foot, club feet or corrective shoes.

Article Source: ArticlesBase.com – How to Resole a Shoe and Attach a New Heel

Shoe Repair Shop, Footwear

Comments are closed